Paint Protection Film
What is Paint Protection Film?
If you desire rock chip protection, scratch protection, increased gloss, and ease of cleaning, this can only be found in paint protection film, also known as clear bra, ppf, or invisible bra.
View packages
Benefits of Paint Protection Film
Scratch and Impact Resistance
Paint protection film by SunTek protects your car's paint from chips and scratches, it is made from durable polyurethane material. It absorbs impacts, protecting the paint from everyday hazards such as road debris, gravel, and even minor collisions.
UV Protection
SunTek's paint protection film offers excellent protection against UV rays. This film has a UV-stabilized layer that blocks harmful UV rays, preventing them from causing fading, discoloration, and other types of damage to the paint. This means that your car's color will stay vibrant and true, even after years of exposure to the sun.
Easy to Maintain
Paint protection film by SunTek is extremely easy to maintain, it creates a hydrophobic barrier that repels water, dirt, and grime, making it much easier to clean. This means that you'll spend less time washing and detailing your car, and you'll need to use fewer products to keep it looking its best.
Self-Healing
SunTek's paint protection film is self-healing, which means that it has the ability to repair small scratches and swirl marks caused by everyday use. With this film, any small imperfections that may occur on the paint surface will disappear on their own over time.
Ceramic coating vs Paint Protection Film
We handle this question often, and the conversation can be very lengthy. But lets give the short points. Paint Protection Film has properties that ceramic coatings don't have, such as; self-healing, minor impact resistance, prevents oxidation, and swirl mark resistance. These are the primary reasons for installing over ceramic coatings. The biggest flaw for most people, the cost is more prohibitive for full coverage than ceramic coatings.
Certified Installer
To keep in line with choosing the best products available, we have chosen to align ourselves with Suntek as our paint protection film provider. Having one of the most best adhesives and most durable top coats in the market prevents the film from lifting and peeling away as flexing and moving of the panels occurs. Also, we utilize Suntek's cutting software to ensure that we have the tightest fitment and fewest seams available.
.jpg)
Browse our packages
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Suspendisse varius enim in eros elementum tristique. Duis cursus, mi quis viverra ornare, eros dolor interdum nulla, ut commodo diam libero vitae erat. Aenean faucibus nibh et justo cursus id rutrum lorem.
The partial impact package covers the full front bumper, approximately 1/3 of the hood and fenders, and side mirrors. NOTE: Hood edges will be wrapped for cleanest fitment. This package will begin with a new car prep: PH Neutral Wash, Paint Decontamination and Clay Bar. Average Installation time: 4.5 Hours (not including prep time). Vehicle needed min. 48-72 hours (depending on coverage options) before release, giving plenty of time to relieve air pockets or trim excess film away.
- Full Bumper
- Partial Hood
- Partial Fenders
- Mirror Caps
The full impact package covers the full front bumper, full hood and fenders, and side mirrors. NOTE: Hood edges will be wrapped for cleanest fitment. This package will begin with a new car prep: PH Neutral Wash, Paint Decontamination and Clay Bar. Average Installation time: 8 Hours (not including prep time). Vehicle needed min. 48-72 hours (depending on coverage options) before release, giving plenty of time to relieve air pockets or trim excess film away.
The complete coverage package covers the full vehicle. NOTE: Where applicable, edges will be wrapped for cleanest fitment. This package will begin with a new car prep: PH Neutral Wash, Paint Decontamination and Clay Bar. Average Installation time: 30 - 40 hours (not including prep time). Vehicle needed min. 48-72 hours (depending on coverage options) before release, giving plenty of time to relieve air pockets or trim excess film away.
The track package is an extension of the full impact package to include the rocker panels and splash guards to protect the lowest parts of the vehicle from stone chips thrown up by the wheels and the a-pillar to protect the most sensitive areas around the windshield. This package will begin with a new car prep: PH Neutral Wash, Paint Decontamination and Clay Bar. Average Installation time: 8 Hours (not including prep time). Vehicle needed min. 48-72 hours (depending on coverage options) before release, giving plenty of time to relieve air pockets or trim excess film away.
The partial impact package covers the full front bumper, approximately 1/3 of the hood and fenders, and side mirrors. NOTE: Hood edges will be wrapped for cleanest fitment. This package will begin with a new car prep: PH Neutral Wash, Paint Decontamination and Clay Bar. Average Installation time: 4.5 Hours (not including prep time). Vehicle needed min. 48-72 hours (depending on coverage options) before release, giving plenty of time to relieve air pockets or trim excess film away.
- Full Bumper
- Partial Hood
- Partial Fenders
- Mirror Caps
The full impact package covers the full front bumper, full hood and fenders, and side mirrors. NOTE: Hood edges will be wrapped for cleanest fitment. This package will begin with a new car prep: PH Neutral Wash, Paint Decontamination and Clay Bar. Average Installation time: 8 Hours (not including prep time). Vehicle needed min. 48-72 hours (depending on coverage options) before release, giving plenty of time to relieve air pockets or trim excess film away.
The complete coverage package covers the full vehicle. NOTE: Where applicable, edges will be wrapped for cleanest fitment. This package will begin with a new car prep: PH Neutral Wash, Paint Decontamination and Clay Bar. Average Installation time: 30 - 40 hours (not including prep time). Vehicle needed min. 48-72 hours (depending on coverage options) before release, giving plenty of time to relieve air pockets or trim excess film away.
The track package is an extension of the full impact package to include the rocker panels and splash guards to protect the lowest parts of the vehicle from stone chips thrown up by the wheels and the a-pillar to protect the most sensitive areas around the windshield. This package will begin with a new car prep: PH Neutral Wash, Paint Decontamination and Clay Bar. Average Installation time: 8 Hours (not including prep time). Vehicle needed min. 48-72 hours (depending on coverage options) before release, giving plenty of time to relieve air pockets or trim excess film away.
The partial impact package covers the full front bumper, approximately 1/3 of the hood and fenders, and side mirrors. NOTE: Hood edges will be wrapped for cleanest fitment. This package will begin with a new car prep: PH Neutral Wash, Paint Decontamination and Clay Bar. Average Installation time: 4.5 Hours (not including prep time). Vehicle needed min. 48-72 hours (depending on coverage options) before release, giving plenty of time to relieve air pockets or trim excess film away.
- Full Bumper
- Partial Hood
- Partial Fenders
- Mirror Caps
The full impact package covers the full front bumper, full hood and fenders, and side mirrors. NOTE: Hood edges will be wrapped for cleanest fitment. This package will begin with a new car prep: PH Neutral Wash, Paint Decontamination and Clay Bar. Average Installation time: 8 Hours (not including prep time). Vehicle needed min. 48-72 hours (depending on coverage options) before release, giving plenty of time to relieve air pockets or trim excess film away.
The complete coverage package covers the full vehicle. NOTE: Where applicable, edges will be wrapped for cleanest fitment. This package will begin with a new car prep: PH Neutral Wash, Paint Decontamination and Clay Bar. Average Installation time: 30 - 40 hours (not including prep time). Vehicle needed min. 48-72 hours (depending on coverage options) before release, giving plenty of time to relieve air pockets or trim excess film away.
The track package is an extension of the full impact package to include the rocker panels and splash guards to protect the lowest parts of the vehicle from stone chips thrown up by the wheels and the a-pillar to protect the most sensitive areas around the windshield. This package will begin with a new car prep: PH Neutral Wash, Paint Decontamination and Clay Bar. Average Installation time: 8 Hours (not including prep time). Vehicle needed min. 48-72 hours (depending on coverage options) before release, giving plenty of time to relieve air pockets or trim excess film away.
- Gentle Hand Wash
- Deep Clean Wheels
- De-ionized Water Rinse
- Pneumatic Air Dry
- Satin Tire Conditioner
- Clean Exterior & Interior Glass
- Complimentary Vacuum & Dust-Off
- Gentle Hand Wash
- Deep Clean Wheels
- De-ionized Water Rinse
- Pneumatic Air Dry
- Satin Tire Conditioner
- Clean Exterior & Interior Glass
- Complimentary Vacuum & Dust-Off
- Gentle Hand Wash
- Deep Clean Wheels
- De-ionized Water Rinse
- Pneumatic Air Dry
- Satin Tire Conditioner
- Clean Exterior & Interior Glass
- Complimentary Vacuum & Dust-Off
The partial impact package covers the full front bumper, approximately 1/3 of the hood and fenders, and side mirrors. NOTE: Hood edges will be wrapped for cleanest fitment. This package will begin with a new car prep: PH Neutral Wash, Paint Decontamination and Clay Bar. Average Installation time: 4.5 Hours (not including prep time). Vehicle needed min. 48-72 hours (depending on coverage options) before release, giving plenty of time to relieve air pockets or trim excess film away.
- Full Bumper
- Partial Hood
- Partial Fenders
- Mirror Caps
The full impact package covers the full front bumper, full hood and fenders, and side mirrors. NOTE: Hood edges will be wrapped for cleanest fitment. This package will begin with a new car prep: PH Neutral Wash, Paint Decontamination and Clay Bar. Average Installation time: 8 Hours (not including prep time). Vehicle needed min. 48-72 hours (depending on coverage options) before release, giving plenty of time to relieve air pockets or trim excess film away.
The track package is an extension of the full impact package to include the rocker panels and splash guards to protect the lowest parts of the vehicle from stone chips thrown up by the wheels and the a-pillar to protect the most sensitive areas around the windshield. This package will begin with a new car prep: PH Neutral Wash, Paint Decontamination and Clay Bar. Average Installation time: 8 Hours (not including prep time). Vehicle needed min. 48-72 hours (depending on coverage options) before release, giving plenty of time to relieve air pockets or trim excess film away.
The complete coverage package covers the full vehicle. NOTE: Where applicable, edges will be wrapped for cleanest fitment. This package will begin with a new car prep: PH Neutral Wash, Paint Decontamination and Clay Bar. Average Installation time: 30 - 40 hours (not including prep time). Vehicle needed min. 48-72 hours (depending on coverage options) before release, giving plenty of time to relieve air pockets or trim excess film away.
The partial impact package covers the full front bumper, approximately 1/3 of the hood and fenders, and side mirrors. NOTE: Hood edges will be wrapped for cleanest fitment. This package will begin with a new car prep: PH Neutral Wash, Paint Decontamination and Clay Bar. Average Installation time: 4.5 Hours (not including prep time). Vehicle needed min. 48-72 hours (depending on coverage options) before release, giving plenty of time to relieve air pockets or trim excess film away.
- Full Bumper
- Partial Hood
- Partial Fenders
- Mirror Caps
The full impact package covers the full front bumper, full hood and fenders, and side mirrors. NOTE: Hood edges will be wrapped for cleanest fitment. This package will begin with a new car prep: PH Neutral Wash, Paint Decontamination and Clay Bar. Average Installation time: 8 Hours (not including prep time). Vehicle needed min. 48-72 hours (depending on coverage options) before release, giving plenty of time to relieve air pockets or trim excess film away.
The complete coverage package covers the full vehicle. NOTE: Where applicable, edges will be wrapped for cleanest fitment. This package will begin with a new car prep: PH Neutral Wash, Paint Decontamination and Clay Bar. Average Installation time: 30 - 40 hours (not including prep time). Vehicle needed min. 48-72 hours (depending on coverage options) before release, giving plenty of time to relieve air pockets or trim excess film away.
The track package is an extension of the full impact package to include the rocker panels and splash guards to protect the lowest parts of the vehicle from stone chips thrown up by the wheels and the a-pillar to protect the most sensitive areas around the windshield. This package will begin with a new car prep: PH Neutral Wash, Paint Decontamination and Clay Bar. Average Installation time: 8 Hours (not including prep time). Vehicle needed min. 48-72 hours (depending on coverage options) before release, giving plenty of time to relieve air pockets or trim excess film away.
Available Add Ons
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Suspendisse varius enim in eros elementum tristique. Duis cursus, mi quis viverra ornare, eros dolor interdum nulla, ut commodo diam libero vitae erat. Aenean faucibus nibh et justo cursus id rutrum lorem.
The painted pieces beneath your side doors take quite a beating. Typically oad debris from your front and rear tires kicks up and hits them (commonly called road rash) and wears through the paint. Paint Protection Film is designed to prevent this type of damage from occurring and will prevent a respray in these areas.
Often overlooked but absolutely necessary to protect the most sensitive part of your rear bumper. Add this small piece to any paint protection film package or install it by itself!
Discover the potential
What our customers think.
Contact us today
What happens next?
Once we receive your request we'll have a diagnosis call to talk more about your car, once that's been made we'll organise a time and day for you to come in. No need for an examination first or a deposit!
Sat: 9:00 AM to 5:00 PM (Appointment Only)
Sun: Closed
Frequently Asked Questions
A Ceramic Coating is a liquid polymer that is applied to the surface of a vehicle to provide a hard, durable, and glossy finish that protects the paint finish of various environmental elements, contaminants, and light scratches and while creating a durable hydrophobic layer for ease of cleaning.
A Ceramic Coating typically lasts 3 to 10 or more years, depending on the quality of the product, the level of maintenance, and the environmental conditions it is exposed to. Maintenance is key to the durability of your coating.
Paint Protection Film (PPF) is a clear, self-healing vinyl film applied to the surface of a vehicle to protect the paint from scratches, chips, and other types of damage.
Auto Detailing is the thorough cleaning, restoration, and finishing of a vehicle to produce a high-quality level finish.
